 |
CONSTRUCTION
Engineered Hardwood
IMAGE GALLERY
Jatoba Kitchen
Jatoba Living Room
Mahogany Bedroom
Walnut Home Office
Walnut Kitchen
WOOD SPECIES
|
|
|
Thomasville Engineered Hardwood Flooring
|
|
| Product Specifications |
|
|
- Genuine wood product
- ½” engineered hardwood tongue-and-groove construction
-
5” wide planks
- Pre-finished
- Distinctive natural wood grain with a satin
smoothfinish
- UV-cured polyurethane coating with aluminum oxide for enhanced
durability
- Suitable for nail-down, glue-down or floating installation above
grade, on grade or, with proper site preparation, below grade
- Micro-beveled
edges and ends
- 30-year limited warranty
The hardwoods selected for Thomasville Flooring boast varied wood grains and finish
tones. These naturally occurring wood characteristics, including mineral streaks
and knots, are not considered defects. This should be expected within the same wood
species and even within the same box of product. And, as with any genuine wood product,
our flooring will take on a darker, enriched hue over time. Color variations are
natural due to species, age, character of wood and exposure to sunlight. Normal
exposure to sunlight will result in changes in shades and colors. Variation of shades
between covered and uncovered areas of flooring is common. This is not a product
defect. It is advisable to periodically rearrange rugs and furniture to avoid defined
lines between exposed and unexposed areas.
Our engineered hardwood flooring is a combination of the best natural materials
with state-of-the-art technology. Engineered hardwood construction features multiple
layers of wood bonded together with cross-grain lamination, making it very resistant
to expansion and contraction from moisture and temperature changes. The result is
an incredibly stable floor that resists warping, cupping and cracking under in-door
environmental conditions. Overall thickness of ½” (12 mm) makes carpet-to-hardwood
flooring renovation easy. Wear layer of 11/127” (2.2 mm) is precision-milled hardwood
with an allowance for re-sanding & refinishing of up to 3 times. |
|
| |
|
|
|
|